7
(10) Do not aim the camera at the same object for a long time.
Burn-in of an image may be caused on the fluorescent screen of CRT.
2.OPERATION
The speed dome camera can be controlled remotely horizontal and vertical movement. It is controlled remotely from the
keyboard or controller through a serial connection to the RS-485 connector.
The speed dome camera will conduct a self-check after powered up and the monitor will display as following：
“P：P_D，ID：001，V：2a1”. The information will be disappeared after the self-check is finished.（Protocol and
ID code will be displayed according to the users’ choice）
※If there is any alteration, please according to actual product edition.
Normal Function：
2.1 Pan/Tilt Function
The camera is capable of moving vertically and horizontally. The Pan/Tilt speed is variable for given amount of joystick
deflection.
2.2 Lens Function
2.2.1 Zoom Lens Function
Transform the view angle of the camera（zoom in / zoom out），press[TELE] or [WIDE]。
2.2.2 Focus Function
In some special circumstance, users need conduct focus manual, he can press [NEAR] or [FAR] to transform the focus
and press [CALL] + 59 + [ENTER] or operate the joystick to recover the auto mode.
2.2.3 Iris Function
In normal circumstance, iris is in auto mode. If users need to change the iris level, they can press [OPEN] or [CLOSE] to
adjust. Press [CALL] + 60 + [ENTER] or operate the joystick, iris will be auto.
2.3 Preset Function
The speed dome camera is capable of going to 128 preset positions. Each is with its own P/T/Z and focus. （Preset
positions 50-66 are reserved for auxiliary functions.） When preset a camera position, the P/T/Z and focus will be
memorized for that position.
2.3.1 To set a preset position
[PRESET] + nnn + [ENTER], the LCD displays： SET PRESET ：nnn
nnn→the number of preset position: 1~128
2.3.2 To call a preset position
When camera positions have been preset, you can enter a memorized camera position number.
[CALL] + nnn + [ENTER], the LCD displays： CALL PRESET：nnn
nnn→the number of preset position: 1~128
2.3.3 To delete a preset position： （Only be effective to Protocol COP-2. Some special keyboards no function）
[DELPRESET] + nnn + [ENTER], the LCD displays：CLEAR PRESET ：nnn
nnn→the number of preset position which will be deleted
2.4 Auxiliary Functions List
Operation Function
F1 + 0 + Off Camera reset
F1 + 1 + On Backlight compensation ON
F1 + 1 + Off Backlight compensation OFF
F1 + 2 + On LOW illumination ON
F1 + 2 + Off Auto LOW illumination
(23 pagine)
(35 pagine)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commenti su questo manuale